Heat Press Instructions for DTF Transfers
-
Any Garment
-
Your DTF Transfer
-
Heat Press
1. Position Your Design
Carefully position your transfer. If you are not experienced at lining your transfers up you can use heat tape and pick the garment up and see if that's the placement you re expecting.
2. Press
Press with medium to heavy pressure. Press your transfer at 280°F - 315°F for 8 seconds.
3. Peel!
Release the press and depending on how small the details in your design are you can instantly peel or wait until cool. Lift the transfer from one corner and gently peel in one consistent motion. Small details may need to be cold peeled but most designs can be peeled instantly.
4. Final Press
Place a Teflon sheet (recommended) or parchment/butcher paper to enhance feel, increase durability and remove shine. Press at same temperature for 5 seconds.
Pressing Cheat Sheet
Download and print the cheat sheet so you always know what settings to use.
